4914.1 gb /05 12-01-2000 10:38 Page 25
Connect Peripheral Equipment
There is a wide range of audio and video equipment that can be connected
to your TV.The following connection diagrams show you how to connect
them.
Video recorder
Connect the aerial cables 1, 2 and, to obtain the optimum picture quality,
eurocable 3 as shown opposite.
If your video recorder is provided with the EasyLink function,the eurocable supplied
with it should be connected to EXTERNAL 2 to benefit from the EasyLink
functionality.
CABLE
If the eurocable 3 is not used the following steps are required:
2Search for and store the test signal of the video recorder
EXTERNAL
&Unplug the aerial cable 1from the aerial socket xof your video recorder.
1
éSwitch on your TV and put the video recorder on the test signal.
2
(See the handbook for your video recorder.)
3 Search for the test signal of your video recorder in the same way as you
searched for and stored the TV signals. See Installation, Searching for and
storing TV channels, Manual installation, p. 5.
4
Store the test signal under programme number 0 or between 90 and 99.
VCR 1
(Replace the aerial cable in the aerial socket xof your video recorder after
you have stored the test signal.
Decoder and video recorder
Connect a eurocable 4 to your decoder and to the special euroconnector
of your video recorder. See also the video recorder handbook.
See Define Decoder/Descrambler prog. numbers, p. 7.
You can also connect your decoder directly to EXTERNAL 1 or 2 with a
eurocable.
Video recorder and other peripherals(except Digital Sources)
&Connect the aerial cables 1,2and 3as shown opposite.Better picture
CABLEquality can be obtained if you also connect eurocable 5 to EXTERNAL 2
and a eurocable 4 to EXTERNAL 1 or 3.
éLook for the test signal of your peripheral in the same way as you do for
EXTERNAL
1 2a video recorder.
13
When a video recorder is connected to EXTERNAL 1 you can only record a
programme from your TV.
45Only when a video recorder is connected to EXTERNAL 2 it is possible to record a
2programme from your TV as well as from other connected equipment.See Record
with your video recorder,p.30.
Note:EXTERNAL 1 can handle CVBS and RGB,EXTERNAL 2 CVBS,Y/C and RGB,
EXTERNAL 3only CVBS.
VCR 1
Connect Peripheral Equipment25 |
ACEC
