CD645.QXD 2/1/07 10:18 AM Page 10
3Connect the other end of the line cordto
the telephone line socket and the other end
3Getting started
of the power cable to the electricity socket.
3.1Connect the base station
Caution
Avoid placing the base station too close to large
metal objects such as filing cabinets, radiators or
electrical appliances.This can impair the range
and sound quality. Buildings with thick internal
and external walls may impair transmission of
signals to and from the base.
Note
The line adaptor may not be attached to the
Warning
line cord. In this case, you have to connect the
Power is applied when the power adaptor isline adaptor to the line cord first before
plugged into the unit and connected to theplugging the line cord to the line socket.
electricity socket.The only way to power down
the unit is to unplug the power adaptor from
the electricity socket.Therefore, ensure that3.2Install rechargeable batteries
the electricity socket is easily accessible.Your CD645 is supplied with two rechargeable
batteries. Before using the handset, install the
The power adaptor and the telephone line cord batteries into the handset and fully charged
them up.
have to be connected correctly, as incorrect
1Slide out the battery cover
connection could damage the unit.
Always use the telephone line cord supplied
with the unit. Otherwise, you may not get a dial
tone.
1Insert the plug of the power cord into the
socket under the base station.
2Place the batteries as indicated in the
battery compartment and replace the
battery cover.
3.3Place the handset on the charging
2Insert the plug of the line cordinto the
cradle
socket under the base station.
Note
Charge the handset for at least 24 hours before
using it for the first time.
When the battery is fully charged, the talk time
of your phone is approximately 12 hours and
the standby time is approximately 150 hours.
1Place the handset on the charging cradle of
the base station.
10Getting started |
ACEC
