xp CDR785/00 engels.4 14-11-2000 16:30 Pagina 33
TROUBLESHOOTING
WARNINGLASER SAFETY
Under no circumstances should you try to repair theThis unit employs a laser. Only a qualified service
set yourself as this will invalidate the guarantee. Doperson should remove the cover or attempt to service
Englishnot open the set as there is a risk of electric shock.this device, due to possible eye injury.
If a fault occurs, first check the points listed, before taking
the set for repair.
If you are unable to solve a problem by following these hints,
consult your dealer or service centre.
SYMPTOMINSERT DISC indication
Y possible solution:Y replace or clean the disc
Y insert a CD(RW), label upwards
No powerY wait until the lens has cleared
Y ensure that the ON/OFF button is on: the set is in standby
mode, press any key to activate itUSE AUDIO CD indication
Y ensure that the mains cable is plugged in correctlyY insert a digital audio disc marked with ODigital audio� and
Y switch the set OFF and then immediately back ONthe special logo
Auto track does not workCHECK INPUT indication
Y check if auto track is selectedY select the correct input
Y check if there are 2.7 seconds silence in between the tracksY make sure the connection cable is properly connected
(analog recording only)
Y check if the source is a consumer source with the digitalWill not record
output according to the IEC audio standardY clean the disc
Y source is DVD player (no track information)Y check if CDR(W) is an unfinalized disc
Y check that the disc is recordable and replace if necessary
No soundY the disc is not an AUDIO disc (WRONG DISC)
Y check the audio connectionsY wrong input source chosen. Input label flashing (CHECK
Y if using an amplifier, try using a different source INPUT)
Y text memory full (MEMORY FULL / FINALIZE CD).
Amplifier sound is distortedWhen a CDRW has to be unfinalised for recording. Erase
Y check that the analog output of the set is not connected totext for other disc(s) or finalize other disc(s) to obtain
the amplifier Phono inputmemory space
Play will not startRecording is distorted
Y ensure that the label of the CD is facing upY make sure the recording level is correct
Y clean the disc
Y check that the disc is not defective by trying another disc20 second pause between recordings
Y see ORecording with automatic synchronized startO.
Remote control does not work
Y point the remote control directly at the setSet does not react
Y check the batteries and replace if necessaryY switch the set OFF and then immediately back ON
Y select the right source first
Recorded disc does not play in other standard CD
DISC RECOVER indicationplayer
Y a power failure has occurred during recording, the CDY finalize the CDR(W)
recorder is attempting to repair the disc Y insert the CDRW in a CDRW compatible player
Y if DISC ERROR then appears on the display, the disc
cannot be recorded further, and cannot be finalised. But it
can still be played on the CD recorder or another CD
recorder.
Y on a CDRW disc, the track being recorded is lost, but
further recording and finalization can still be done
33 |
ACEC
