PreparationOperation
Basic Playback
Switching On
1Press POWER ON/OFF on the front panel.
1Switch on the TV and DVD player.
2Set the TV to the correct Video IN channel. (eg.2Press OPEN/CLOSE on the front panel to open
EXT1, EXT2, AV1, AV2, AUDIO/VIDEO, etc.disc loading tray.
Please refer to to your TV ownerOs manual for3Place the chosen disc in the tray, with the label
detail)facing up.
� The player display lights and the default screen4Press OPEN/CLOSE again to close the tray.
appears on the TV.� After recognizing this disc the player begin to
3If you are using an external equipment (eg. audioplayback automatically.
system or receiver), turn them on and select the
appropriate input source that was used to
connect to the DVD player output. Refer to the
equipment ownerOs manual for detail.
POWER ON/OFF
Notes:
� DVDs may have a region code. Your player will
not play discs that have a region code different
from the region code of your player.
� If �Disc LockO is set to ON and the disc inserted
is not authorized, the 4-digit code must be entered
and/or the disc must be authorized (see �Disc
LockO).
General operation
Video control during playback
STOP DVDVCDCD
1 You can resume the play from the point at which
you stopped last time, if you just press the STOP
key once. It will start from the beginning if you
press the STOP key twice to stop playback.
PAUSE/STEP DVDVCDCD
1 To get a still picture, press PAUSE key during
playback.
2 To step forward to the next frame picture, press
PAUSE key again.
3 To resume normal playback, press PLAY.
SEARCH DVDVCDCD
1 To search the contents in fast speed, press the 2
or 1 for fast forward/backward searching.
2 Press the 1 or 2 again to increase the speed for
searching.
3 Press PLAY to return to the normal playback.
10
DVD736K IFU for /751 3141 016 19191 DVD 736K/691 English IFU102001.1.31, 10:32 AM
?? |
ACEC
