Preparation
Depending on your TV and other equipment there
Optional TV Connections
are various ways you can connect the player.
Please refer to the manuals of your TV, VCR,These connections support only DVD playback. The
stereo system or other devices as necessary fortuner and VCR still output through the DVD/VCR
additional connection information.OUT (A1, V) jacks.
Introduction
Note:
Notes:
The video may be displayed unstable.
? The picture and sound of a nearby TV, VCR, or
Rear of DVD+VCR
radio may be distorted during playback. Position
the units away from each other or turn off the unit
after removing the disc.
? Do not connect the unit?s AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Do not connect the unit via another VCR. The
DVD image could be distorted by the copy protec-
tion system.
? Please ensure that an external cable/satellite box
is connected to the DVP3340V.
CA2S
Basic TV Connections
Make one of the following connections, depending on
the capabilities of your TV.PrPbYRL
COMPONENT/PROGRESSIVE SCANVIDEO INPUTAUDIO INPUT
Rear of TVRear of TV
VIDEO INPUTVIDEO INPUTAUDIO INPUTAUDIO INPUTRear of TV
LLRR
S-Video connection
Connect the S-VIDEO OUT jack on the unit to the
S-Video jack on the TV using the optional S-Video
V VA1A1
cable (S).
Component Video / Progressive Scan
Rear of DVD+VCR
connection
If your television is a high-definition or ?digital ready?
television, you may take advantage of the unit?s pro-
gressive scan output for the highest possible video
resolution.
Connect the COMPONENT/PROGRESSIVE SCAN
Rear of DVD+VCRVIDEO OUT jacks on the unit to the corresponding
jacks on the TV using an optional Y Pb Pr cable (C).
Audio/Video connection
Audio connection
1. Connect the DVD/VCR VIDEO OUT jack on the
CA2S
unit to the video in jack on the TV using the videoConnect the Left and Right AUDIO OUT jacks of the
cable supplied (V).unit to the audio left/right in jacks on the TV using the
2. Connect the Left and Right DVD/VCR AUDIOsupplied audio cables (A2).
OUT jacks on the unit to the audio left/right in
YCOMPONENT/PROGRESSIVE SCAN
jacks on the TV using the supplied audio cablesPrPbVIDEO INPUTRLAUDIO INPUTNote:
(A2).
If you connect both S-Video and component jack to
Rear of TVNote:your TV, video displayed might be unstably on your
If you use this connection, set the TV?s source selec-TV. You should disconnect one of both connections to
tor to VIDEO.solve the problem.
11 |
ACEC
