Tape Operation / Recording
English
To select and record a particular passage
within a CD track:Recording from the radio
I Press and hold down on REW a or F.FWD1Tune to the desired radio station (see Tuning to
á. Release the control when you recognize theradio stations).
passage you want.2Press STOPYOPEN�ç to open the tape
I To interrupt CD playback press 2; .door.
I Recording starts from this exact point in the
track when you press RECORD 0.3Insert a suitable tape into the deck and close the
tape door.
6To pause, press PAUSE A. Press again to
resume.4Press RECORD 0 to start recording.
7To stop recording, press STOPYOPEN�ç.5To pause, press PAUSE A Press again to
resume.
6To stop recording, press STOPYOPEN�ç.
Maintenance
Cleaning the CabinetCleaning the Heads and the Tape Paths
I Use a soft cloth slightly moistened with a mildI To ensure good recording and playback quality,
detergent solution. Do not use a solutionclean the heads A, the capstan(s) B, and
containing alcohol, spirits, ammonia or abrasives.pressure roller(s) C after every 50 hours of
tape operation.
Cleaning DiscsI Use a cotton swab slightly moistened with
I When a disc becomes dirty,cleaning fluid or alcohol.
clean it with a cleaning cloth.I You can also clean the heads by playing a
Wipe the disc from the centrecleaning tape once.
out.
I Do not use solvents such as
benzene, thinner, commercially
available cleaners, or antistatic spray intended
for analogue records.
Cleaning the disc lensAA B C
I After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with PhilipsDemagnetising the heads
I Use a demagnetising tape available at your
CD Lens Cleaner or any commercially availabledealer.
cleaner. Follow the instructions supplied with
cleaner.
16
pg001-pg020_FWM139_55_Eng162006.5.23, 16:06 |
ACEC
