Switching on and off- Set the thermostat knob to position y (the
lowest thermostat setting, which is about 5°C).
The function selector (D) enables you to select theThe fan heater will switch off.
following functions:- The fan heater will switch back on automatically
O = OOff�.Both the fan and the two heatingwhen the room temperature drops below 5°C.
elements are switched off.Overheating safety device
= OQuiet� setting.(Type HD 3348 only.)
If set to this position the appliance operatesTo prevent damage and risks due to overheating,
almost silently. Nevertheless it providesthe built-in overheating safety device cuts off the
enough heat to keep a person comfortablypower as soon as the heating elements become
warm if he/she is close to the heater. too hot.
1 = OWarm air� for gradual heating-up.If this should happen:
The fan and one heating element are- (Types HD 3346 and HD 3348 only): First
switched on.ensure that it was not the thermostat which has
2 = OHot air� for quick heating-up.switched off the heater. Set the thermostat to
The fan and two heating elements aremaximum position. If the heater still does not
switched on. switch on, you can be sure that the safety
device has been activated.
- Remove the mains plug from the wall socket.
Thermostatic temperature control - Let the heater cool down for 10 minutes.
(Types HD 3346 and HD 3348 only)- Check that the heater has been placed correctly.
- Check if anything is obstructing the air flow.
Your fan heater is equipped with a thermostaticIf necessary, clean the grilles with a vacuum
temperature control (G). This control is used tocleaner.
keep your room at a comfortable temperature by- Replace the plug into the wall socket and switch
sensing the temperature in the room andthe heater on again.
switching the fan heater on and off automatically
to ensure this temperature is maintained.If the safety device again switches off the heater:
- Remove the mains plug from the wall socket.
To find the most comfortable setting:- Have the heater inspected by a Philips Service
- Turn the fan heater on.Centre or your dealer.
- Turn the thermostat knob (G) clockwise to the
highest setting.
- When the room temperature is comfortable,Cleaning
turn the knob slowly anti-clockwise until the fan
heater switches off.- Set the function selector (D) to position O to
- The fan heater will switch back on automaticallyswitch off.
when the room temperature drops.- Remove the mains plug from the wall socket.
- Wait for the heater to cool down sufficiently.
You can turn the thermostat knob while you are- You may clean the outside of the heater with a
using the fan heater.damp cloth. Do not allow water to enter into the
appliance.
Pilot light- Clean the air inlet and outlet openings regularly
- When the appliance is plugged in and switched(with normal use at least twice a year) with a
on, the pilot light will come on.vacuum cleaner, using the brush attachment.
- The pilot light will stay on until the appliance is
switched off or unplugged.
- The pilot light will stay on even when the
thermostat turns the fan heater off.
This shows that the fan heater is still plugged in
and switched on.
Frost protection y
You can use the fan heater to keep frost away
from the area near the fan heater. For example, to
prevent pipes freezing.
- Put the fan heater close to the spot that you
want to keep frost-free.
- Switch the fan heater on.
5 |
ACEC
