132990430.qxd 01/04/2004 13:28 Pagina 9
6 Spin reduction button8 Programme selector dial
By depressing this button you can reduce the max.The selector is divided into 5 sections:
spin speed proposed by the machine. The relevant
light illuminates.? Cotton
Colours
The maximum speeds are: Delicate
for cotton, synthetics, hand wash and wool:800 r.p.m.
? Wool
for delicate fabrics: 500 r.p.m.? Special programmes
O Reset programme/OFF
7 Programme display
When you select the programme, the light
corresponding to the maximum spin speed provided
or the various phases making up the programme
comes on. At the same time the light of the
Start/Pause button starts blinking.
Spin speed lights: are on during the washing
programme and remain alight at the end of the cycle.
The selector dial can be turned either clockwise or
anticlockwise.
Position 60E corresponds to the ENERGY SAVING
programme.
At the end of the programme the selector dial
must be turned to position O to switch the
machine off.
Attention!
If during a washing programme the selector dial is
Function: when this light comes on this means thatturned to another programme, the pilot lights of the
the machine is performing the washing programme.programme progress display start to flash. The
machine will not perform the new selected
End: when the programme has finished, the End?programme.
pilot light comes on. If the Rinse Hold option has
been selected, the End and the Door pilot lights
remain lit.
The End light flashes in the event of operating
problems :
4 flashes: door open
2 flashes: problem with water draining
1 flash: problem with water supply
For more information see paragraph Trouble-
shooting guide.
Door: the Door pilot light indicates if the door can
be opened:
- light on: the door cannot be opened
- light off: the door can be opened
It stays on during the whole programme indicating
that the door is locked.
When the light goes out, the door can be opened
(see page 13)
9 |
ACEC
