6StudioProjectswww.studioprojects.com7
B1B3
The Studio Projects B1 is an externally polarized cardioid pressure gradient
The Studio Projects B1 is an externally polarized cardioid pressure gradient transducer microphone with FET impedance converter. Diaphragm material
transducer microphone with FET impedance converter. Diaphragm material is 3?m mylar for natural reproduction of vocals and instruments. It features
is 3?m mylar for natural reproduction of vocals and instruments. It features
dual selectable pads and high pass filters for a total of nine possible modes
a selectable pad and high pass filters as well as three directional pattern of operation. The output circuitry is active and is capable of driving long cable
settings: omnidirectional, cardioid and figure of eight. The output circuitry is runs. The B1 is useful for all manner of recording work and music styles.
active and is capable of driving long cable runs. The B3 is useful for all man-
ner of recording work and music styles.
B1SPECIFICATIONS
Sensitivity: -34dB,(0dB=1V/Pa)B3SPECIFICATIONS
Polar pattern: Cardioid.
Sensitivity: 14/16/18mV/Pa
Frequency response: 20~20000Hz. (Omni/Cardioid/Figure 8)
(-37/-36/-35dB @1000Hz)
Noise level: 12dB-A (IEC651).
Polar pattern: Cardioid, Omni, Figure 8.
S/N ratio: 82 dB.
Max. Output: 2.5V rms @1000Hz,<1% THD.
Max. Output: 3.3V 0.5% THD @1000Hz at 1KOHM load impedance.
Max. SPL: 137 dB SPL (Cardioid) @1000Hz,<1% THD.
Max. SPL: 137 dB
Noise Level: 14 dB-A (IEC651) CardioidPower requirement: 48 +/- 4V, 3mA.
S/N ratio: 80 dB.Accessories: Shockmount, Foam Windscreen.
Recommended Input Impedance: 1200 OHMs
Power requirement: 48V +/-4V.
Current: 2.5mA.
Accessories: Shockmount, Foam Windscreen
b_series_manual.indd 8-96/8/06 4:28:04 PM |
ACEC
