INSTRUCTIONS FOR THE INSTALLER
The following instructions are intended for the installer in order that the operations of installation, regulation and
maintenance are carried out in the best possible manner and according to the regulations in force. All interventions
must be carried out with the appliance disconnected.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR DAMAGES CAUSED BY AN
INSTALLATION WHICH DOES NOT CONFORM TO THE REGULATIONS IN FORCE.
Installation and maintenance of the appliance must be carried out by a professional qualified according to the articles
regulating the art in force, noteably: NBND 51003.
For appliances connected to the electricity network: regulation NBN.
We shall not be responsible in case of accidents or incidents caused by inexisting or defective earthing.
PLACEMENT
This is a type X appliance.
It has been designed to be placed between two furniture units whose height does not exceed the cooker's plate
height (EN 60 335-2-6).
WHEN THE COOKER IS FIRST INSTALLED
Once the cooker has been installed it is important to remove the protective materials which were put on in the factory.
Switch the oven control to MAX and leave it to run, empty, for 30 minutes to remove any unpleasant new smells.
Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.
LEVELLING
The cookers are supplied with adjustable feet fitted on
the back and front angles of the base.
The feet can be regulated (Fig. 10) to adjust the height
of the appliance to that of the neighbouring units and
for an even distribution of liquids contained in pans.
Fig. 10FO 0063
52 |
ACEC
