yourDryer
1. Put the sorted load in the dryer
and close the door tightly.
2. Turn the Cycle Control Knob to
the cycle you want.
l Use LIGHT for sma I loads of light-
weight fabrics The LIGHT Cycle runs for
the least time Use LI?GHT also to damp
dry loads for lronrng
l Use MED for norm& size loads of light
or medium weight fabrrcs [sheets, pii-
lowcases. shirts, etc )
l Use HEAVY for normal size loads of
heavy fabrrcs (towels, jeans, corduroys\ l Use PERMANENT FRESS for a loriger
l Use EX HEAVY for large loads or for period of cool-down time Set the
heavy bulky Items (quilts spreads blar- pointer for the number of minutes of
kets, etc ] dn/ing time you wont [See Setting
Dn/lng rimes on page 6 1
SUGGESTION: l If laundry IS left in the dryer after it has
You can set the Cycle Control Knob stopped tumbling, use the Tumble
anywhere past, between or below Press Control setting (page 6: to help
the EX HEAVY and LIGHT settings For remove the hrinkles
the ftrst few loads 3. Set TEMPERATURE SELECTOR.
l Set the pornter lr the middle of the l Turn the TEMPERATURE SELECTOR to
load setting the drying temperoture needed for
l If the load IS drier than you wont, the load See page 5 for suggested
set it to the rrght (for less time1 the
next time settings
l If the load IS not as dry as you 4. Push the Start Button.
want, set tt to the left [for more time; l Make sure the door IS closed and
the next time Cycle Control IS set If the door IS
For example: opened during the cycle the dryer wrll
stop To restart the dryer, close the
door arid push the Start Button
5. To stop the dryer:
l Open the door
l Or, turn the Cycle Control Knob to one
of the OFF postions
l To change the setting while the
dryer is running, tdrn the Cycle Control
Knob, either way so It points to the sei-
tlng you want
NOTE: The Cycle Control Knob
should point to OFF when the dryer is
not being used
IMPORTANT To help reduce wrin-
kling take the load from the dryer as
soon as tumbling stops This IS very
Important for permanent press, knits
and other synthetic fabrics |
ACEC
