Top Hinge
Reversing the Door Handles
Cone Screw (Use on Top and Bottom of
Handles)
Countersink Screw
1. Top Hinge Cover
2. Hex-Head Hinge Screws Handle Screw (Use on Front of Handles)
3. Top Hinge
4. Sealing Screws
To remove handles:
Center Hinge1. Remove freezer handle assembly as shown. Keep all
parts together.
2. Remove refrigerator handle bottom screw. For Style 1,
pry off screw cover and remove screw. For Style 2,
slide trim downward and remove screw.
3. Remove refrigerator handle assembly as shown. Keep
all parts together.
To reinstall freezer handle:
1. Position freezer handle on the opposite side of the
freezer door and install top two screws.
2. Install the bottom two screws.
1. Door Stop
2. Door Stop Screw 3. Tighten all screws.
3. Center Hinge
4. Hex-Head Hinge Screws To reinstall refrigerator handle:
5. Sealing Screws1. Unscrew the hole plug in the refrigerator door and
screw it into place on the opposite side.
Bottom Hinge2. Position the refrigerator handle on the refrigerator door
and attach it at the top with two screws.
3. Align the lower portion of the handle and attach it to the
refrigerator with one screw.
4. Replace refrigerator handle bottom trim. For Style 1,
position screw cover over the screw and push it until it
snaps into place. For Style 2, align the top edge of the
trim with the notches in the lower part of the handle
and slide the trim upward into place.
1. Door Stop
2. Door Stop Screw
3. Bottom Hinge
4. Hex-Head Hinge Screws
9 |
ACEC
