Installing it properly
1. Allow 1.25 cm (% inch) space on each
side and at the top of the refrigerator for
ease of installation.
2. If the hinge side of the refrigerator is to be
against a wall, you might want to leave
extra space so the door can be opened
wider.
3. The refrigerator can be flush against the
back wall.
Leveling it
Your refrigerator has 2 front leveling
screws-one on the right and one on the left.
To adjust one or both of these, follow the
directions below. Use a screw-
1. Remove base grille. (See page 11.)
2. To raise front, turn screw clockwise. driver to adjust
3. To lower front, turn screw counterclock-
wise.
4. Check with level.
5. Replace base grille. (See page 11.) |
ACEC
