Care and Maintenance
IMPORTANT:Cleaning the Cutting Burrs
Y Make sure the Coffee Mill is switchedIf the mill is used frequently, the
OOff� and unplugged before cleaning.cutting burrs need to be cleaned every
Y Do not immerse motor housing few weeks for best performance.
in water.Cleaning enables the burrs to achieve
Y Do not use abrasive cleaners orthe most consistent grinds possible.
scouring pads.Without regular cleaning, the mill may
YNever immerse the cutting burrs,clog, which could cause damage to
burr-shaft assembly, or face-platethe Coffee Mill.
assembly in water. Keep them dry Foreign objects � like pebbles or
at all times.twigs � sometimes find their way into
whole bean coffee. These objects may
Cleaning the Coffee Mill
cause the mill to jam. If this happens,
1. Loosen and scrape leftover grindsfollow the burr-cleaning procedure to
from the grinding spout with theremove the foreign material.
cleaning tool after each use.
2. Wipe the motor housing and cordTo clean the removable burrs:
with a clean damp cloth.1. Empty the bean hopper and
3. Dry with a soft cloth.remove from the base.
2. Locate the removable-burr set screw
on the back of the Coffee Mill.
4. Wash the bean hopper, lid, and
glass in hot soapy water.
5. Dry all parts thoroughly before
attaching them to the Coffee Mill.3. Using a Phillips-head screwdriver,
NOTE: The bean hopper, bean hopperturn the set screw counter-
lid, and measuring glass are dishwasherclockwise to loosen, and remove.
safe, but repeated dishwasher cleaning
may cause the graduated markings on
the measuring glass to fade.
8 |
ACEC
