Removing the crisper cover
ETISNK and ETISNM
To remove the cover:
1. Remove the crispers.
2. Lift cover front.
3. Pull cover up and out.
To replace the cover: Lift the front,
then the back.
1. Fit back of cover into notch supports on walls
of refrigerator.
2. Lower front into place.
3. Replace crispers.
ET20NK and ETZONM
To remove the cover:
1. Push up glass insert from the bottom, then
slide it out with both hands.
2. Lift front of cover frame.
3. Pull cover frame up and out.
4. Remove metal cover support. Remove the
glass insert.
To replace the cover:
Lift front of
1. Replace metal cover support on wall supports cover frame,
in front section of cabinet. then the back.
2. Fit back corner of cover frame into notch
supports on walls of refrigerator, then lower
front onto metal cover support.
3. Slide back of glass insert into cover frame.
Then lower front to level position.
Using the ice cube trays
If cubes are not used, they may shrink. The
moving cold air starts a slow evaporation. The
longer cubes are stored, the smaller they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.
10 |
ACEC
