Maintenance, cont.
Removal of GasOven LightConventional Sur-
Appliance(select models)face Burners
(select models)
Gas appliance connectors used to connect CAUTIONS:
this appliance to the gas supply are notUnder no circumstances are the surface
designed for continuous movement. OnceYDisconnect power to range beforeburner assemblies to be taken apart for
replacing light bulb.
installed, DO NOT repeatedly move thiscleaning. The surface burner assembly can
YUse a dry potholder to prevent pos-
gas appliance for cleaning or to relocate. Ifbe removed to clean the burner box area.
sible harm to hands when replacing
this appliance has to be moved and/orThe two surface burner assemblies are
bulb.secured in place during transportation with
removed for servicing, follow the proce-
YBe sure bulb is cool before touching.screws. Once the range is installed, these
dure described in the installation instruc-
YDo not touch hot bulb with a dampscrews may be removed to allow quick
tions.
cloth as this may cause the bulb toand easy removal of the burner assem-
To prevent range from accidentally tip-break.blies.
ping, range must be secured to the floor by
To remove: Allow the burner assembly to
sliding rear leveling leg into the anti-tip
cool. Lift up cooktop. Grasp the burner
bracket.To replace light bulb:
assembly and rotate it slightly toward the
1. Remove light bulb.left to release the two tabs on the assembly.
2 Replace with a 40 watt appliance bulb.Then lift the assembly and pull toward the
Oven Window3. Reconnect power to range. Reset clock.back of the cooktop until the air shutter
ends on the assembly release from the
(select models)
valves.
To protect the oven door
To replace: Insert the air shutter ends on
window:the burner assembly over the valves and
lower the assembly into place. Be sure to
1. Do not hit the glass with pots, pans,
secure the two tabs on the burner assem-
furniture, toys, or other objects.bly into the two slots on the burner sup-
2. Do not close the oven door until theport bracket which is mounted to the
oven racks are in place.burner bottom. (NOTE: If the tabs are not
properly inserted into the slots, the assem-
Scratching, hitting, jarring or stressing the
bly may rock and the burners may not
glass may weaken its structure causing an
light properly.)
increased risk of breakage at a later date.
11 |
ACEC
