To set the Timer to turn on the air conditioner, keeping
Temperatureprevious settings:
1. Turn off the air conditioner.
Press the plus button to raise the temperature. Each time you
2. Press TIMER. Timer indicator light will flash. Display will show
press or hold the plus button, the temperature will go up 1o to
remaining hours before the air conditioner will turn on.
a maximum temperature of 86°F (30°C).
3. Press the plus or minus button to change delay time from 1 to
NOTE: After 3 seconds, display will show the current room
24 hours.
temperature.
4. Press TIMER again or wait 10 seconds. Timer indicator light
will remain on. Display will show current room temperature.
To set the Timer to turn on the air conditioner, changing
previous settings:
1. Turn on the air conditioner.
2. Adjust the mode to Cool, Fan Only, or Power Saver.
3. Adjust the fan speed to Turbo, High, Low or Auto.
Press the minus button to lower the temperature. Each time 4. Adjust temperature between 64°F and 86°F (18oC and 30oC).
you press or hold the minus button, the temperature will go
5. Turn off the air conditioner.
down 1o to a minimum temperature of 64°F (18°C).
6. Press TIMER. Timer indicator light will flash. Display will show
NOTE: After 3 seconds, display will show the current room remaining hours before the air conditioner will turn on.
temperature.7. Press the plus or minus button to change delay time from 1 to
24 hours.
Timer Delay8. Press TIMER again or wait 10 seconds. Timer indicator light
will remain on. Display will show current room temperature.
To set the Timer to turn off the air conditioner (the air
conditioner must be On): To clear Timer delay program:
1. Press TIMER. Timer indicator light will flash. Display will show NOTE: Air conditioner can be either on or off.
remaining hours before the air conditioner will turn off.
Press and hold TIMER for 3 seconds. Timer indicator light will
shut off.
To see or change the remaining time (in hours):
1. Press TIMER once after it has been programmed. Display will
show remaining time.
2. Press the plus or minus button to adjust the delay time from
1 to 24 hours.2. While the display is showing the remaining time, you can
press the plus or minus button to increase or decrease the
3. Press TIMER again or wait 10 seconds. Timer indicator light
will remain on. Display will show the current room time.
temperature.3. After 10 seconds, display will show the current room
temperature.
Using the Remote Control
NOTE: Remote control may vary in appearance.NOTE: Two AAA batteries (included) power the remote control.
Replace batteries after 6 months of use, or when the remote
control starts to lose power.
To Turn the Air Conditioner On or Off
Press POWER.
POWER
To Select the Mode
Press COOL, FAN, or POWER SAVER.
COOLFANFAN
SPEED
COOLFANPower saver
AUTO
Power saver
TIMER
To Select the Fan Speed
Press FAN SPEED for Turbo, High or Low or Auto.
NOTE: Auto fan speed cannot be selected in Fan Only mode.
POWER
FANAUTO
SPEED
12 |