Models without heat
Timer Delay
To set the Timer for a 1- to 24-hour delay until the air
conditioner turns on (the air conditioner must be Off):
Models with heat1. Press TIMER. Indicator light remain on.
2. Press the plus or minus pad to change the delay time from
1 to 24 hours.
Fan Speed
3. To turn Timer off, press TIMER again.
Models without heat
1. Press and hold FAN SPEED.To set the Timer delay for a 1- to 24-hour delay until the air
2. Choose AUTO, TURBO, HIGH or LOW. conditioner turns off (air conditioner must be On):
1. Press TIMER. Indicator light will remain on.
When Auto is selected, the fan speed will change
automatically as the temperature in the room changes.2. Press the plus or minus pad to change the delay time from
1 to 24 hours. The display will automatically go back to the
7o or more above the set temperature will use Turbo.set temperature after 10 seconds.
4o - 7o above the set temperature will use High.3. To display the amount of time left, depress TIMER once.
4o or below the set temperature will use Low.4. To turn Timer off, press TIMER twice.
To operate air conditioner with remote control
NOTE: Remote control may vary in appearance.
Models with heat
1. Press FAN SPEED.
2. Choose AUTO, HIGH or LOW.
When Auto is selected, the fan speed will change
automatically as the temperature in the room changes.
Cool mode:
7o or more above the set temperature will use High.
7o or less above the set temperature will use Low.
Heat mode:
7o or more below the set temperature will use High.
7o or less below the set temperature will use Low.
Temperature
Press the TEMP plus pad to raise the temperature 1o until it
reaches 88oF (31oC).
NOTE: Two AAA batteries (included) power the remote control.
Replace batteries after 6 months of use, or when the remote
control starts to lose power.
Press the TEMP minus pad to lower the temperature 1o until it
reaches 66oF (19oC).
NOTE: By pressing both pads at once, the display will switch
from oF to oC.
9 |
ACEC
