42010bGB.FM5 Page 59 Thursday, September 7, 2000 9:29 AM
ELECTRICAL CONNECTION
For Great Britain onlyConnection to a rewirable plug
If the fitted plug is not suitable for your socket
outlet, then it should be cut off and disposed of in
order to avoid a possible shock hazard should it
be inserted into a 13A socket elsewhere.
A suitable alternative plug should then be fitted
to the cable.
1. yellow.
2. The BLUE wire must be connected to the
terminal which is marked with the letter ?N? or
coloured black.
3. The BROWN wire must be connected to the
terminal which is marked with the letter ?L? or
coloured red.
Warning - this appliance must be
earthed
Fuse replacement
If the mains lead of this appliance is fitted with a
BS 1363A 13amp fused plug, to change a fuse in
this type of plug use an A.S.T.A. approved fuse
to BS 1362 type and proceed as follows:
1. Remove the fuse cover (A) and fuse (B).
2. Fit replacement 13A fuse into fuse cover.
3. Refit both into plug.
Important:
The fuse cover must be refitted when changing a
fuse and if the fuse cover is lost the plug must not For the Republic of Ireland only
be used until a correct replacement is fitted.The information given in respect of Great Britain
Correct replacement are identified by twill frequently apply, but a thirhe colour d type of plug and
insert or the colour embossed in words on tsocketh is alsoe used, the 2-pin, side earth type.
base of the plug.In this case, the wire which is coloured GREEN
Replacement fuse covers are available Afrom ND YELLOW must be connected to the EARTH
your local electrical store.contact, and the two wires to the two pins,
irrespective of colour. The supply to the socket
Connection to a rewirable plugmust be fitted with a 16 amp fuse.
If the fitted plug is not suitable for your socket
outlet, then it should be cut off and disposed of in
order to avoid a possible shock hazard should it
be inserted into a 13A socket elsewhere.
A suitable alternative plug should then be fitted
to the cable.
59 |
ACEC
