Is the lint filter dirty (filter indicator lamp on)?
PREPARING THE LAUNDRYSELECTING A DRYING TIME OR A PROGRAMME MAINTENANCE AND CLEANING
AND OPTIONS Is the heat exchanger dirty? (refer to the
1. Check that all fastenings are closed and that Clean the lint filter at the end of every drying Instructions for use)
pockets are empty. Drying Time or Programme and Options:cycle:
Is the ambient temperature too high?
2. Turn the articles inside out. To select a drying time or Programme, turn 1. Open the door.
The dryer does not operate:
the time selector knob clockwise.
3. Place laundry loosely in the drum to make 2. Pull the filter upwards.
Is the power plug properly inserted into the
sure it doesn?t become tangled. To select an option (if available), press the 3. Open the filter.mains electricity socket?
corresponding button.
Sort laundry as follows:4. Remove lint using a soft brush or your Is there a power failure?
Press the button again to cancel the option.
fingertips.
A) By care symbols Has the fuse blown?
(on the collar or inside seam):STARTING AND COMPLETING A DRYING CYCLE5. Close the filter.
Is the door properly closed?
6. Push the filter firmly back into place.
1. Having selected the desired drying time or a Has the drying time been selected?
Suitable for tumble drying
programme and options, press the Start button.WATER CONTAINER TOP OR BOTTOM Has the Start button been pressed?
If the laundry is not removed at the end of
Tumble drying with reduced drying Empty the water container at the end of every Lint filter or water container indicator lamp on:
the drying cycle, an automatic anti-crease
intensity onlydrying cycle. Is the lint filter clean?
cycle will operate for maximum 12 min.
Do not tumble dry2. On completion of the drying cycle, set the 1. Pull the handle to remove the water container. Is the water container empty?
time selector knob to position ?0?. 2. Empty the water container. Is the water container correctly positioned?
B) By amount and thickness/weightThe dryer indicator lamp ?On? switches off. 3. Replace the water container when empty by Is the heat exchanger clean?
Whenever the load to be dried exceeds dryer pushing it completely back in place.Water droplets underneath the dryer:
INTERRUPTING A DRYING CYCLE
capacity, separate laundry according to Is the heat exchanger correctly positioned?
INSTALLATION STABILITY
weight (e.g. towels from thin underwear). Has any fluff on the heat exchanger seal
To interrupt the dryer during operation
When installing your dryer, always carefully
C) By type of fabrics1. Set the time selector knob to ?Airing?.been wiped away?
level the dryer by means of the adjustable
Cotton/linen: Towels, cotton jersey, bed Has any fluff on the door seal been wiped away?
2. Wait at least 5 minutes before opening the feet and check the correct levelling with a
and table linen made of cotton or linen. Has the water container been positioned
door to allow the dryer to cool down.spirit level.
correctly?
Synthetics/Easy Care: Blouses, shirts,
For your safety the drying time stops
overalls, etc. made of polyester or polyamide, HEAT EXCHANGER
automatically if you open the door.AFTER-SALES SERVICE
as well as cotton/synthetic mixes.Clean the heat exchanger at least every 3
3. To restart, after door opening, close the door If, after carrying out the above checks the
D) By drying levelmonths. Wipe away any lint/fluff from the
and press the start button again. malfunction persists or appears again, turn
door seal and interior using a damp cloth.
Sort into: iron dry, cupboard dry, etc.the dryer off and call our After-Sales Service
(Please refer to instructions for use)
Do not tumble dry: Woollens, silk, nylon (refer to guarantee).
stockings, delicate embroidery, fabrics with Please specify:BUILT-IN INSTALLATION
metallic decorations, bulky items such as
To built in the dryer (when absolutely The nature of the fault.
sleeping bags, etc.
necessary)
The dryer type and model.
Important: only use specific indicated dryer-
1. It is recommended to not remove the worktop.
safe additives and rinse items that have been The service code (the number after the word
2. A minimum space of at least 5 cm between
treated with stain remover thoroughly in plenty Service on the adhesive rating plate) on the
the dryer and the furniture is necessary to
of water before drying. Only use specific right-hand side when the door is open.
guarantee the correct airflow.
indicated dryer-safe plastic items and never Your full address and phone number.
dry rubber or articles contaminated with TROUBLESHOOTING GUIDE
vegetable oil in the dryer
If a fault occurs, before contacting our After-
CHILD SAFETY LOCKSales Service, make the following checks to
try and remedy the problem:
How to use the child safety lock:
Drying takes too long / laundry is not dry enough:
1. Open the door.
Was the correct drying time selected?
2. Using a coin or a screwdriver, turn the plastic
Was the inserted laundry too wet (Washing
screw clockwise by 90°.
machine spin speed less than 800 rpm? When
Slot vertical: the door cannot be locked.the spinning speed is less than 800 rpm the
Slot horizontal: the door can be locked.water container fault may occur during
drying cycle).
5019 307 00523 |
ACEC
