Features, Hints, and Care
Drying Times
It is impossible to give exact drying
times. Conditions from home to homeOptional Drying Rack
vary and directly affect drying times.Drying Rack, Part No. 504105, is useful for
The length of time it takes to dry loadsdrying items that require no-tumble drying,
will depend on several variables.
?Load sizesuch as tennis shoes, sweaters, stuffed
?Type of fabric, washer, and spintoys or other delicate items.
speed will determine moisture in
the fabric.General Dryer Care
?Heat and moisture in the room.
Damp air coming into the dryerCleaningDrying Rack
will increase drying time.?Ordinarily, dryer cylinder will need no
?Installation (length of exhaustcare.
duct, etc.).?Wipe dryer cabinet as needed. If detergent, bleach or other washing
products have been spilled on the dryer, wipe immediately. Some
?Electric voltage or gas pressure.products will cause permanent damage if spilled on the cabinet.
If you have an automatic cycle, you?Do not allow sharp or rough objects to lean against the dryer. The finish
need not worry about time. Thecould be damaged.
automatic cycle will determine the time
needed.?Use only a damp or sudsy cloth for cleaning the control panel. Some
Here are some important items tospray prewash products may harm the finish on the control panel.
remember:
Lint Filter
? In some models, the automatic cycleClean lint filter after drying each load. A clean lint filter ensures efficient drying
does not operate as a timed cycle.and clothes will remain lint-free when unloading dryer. A layer of lint on the
While using this feature, the cyclescreen will reduce air flow through the dryer and lengthen drying time. Lint
dial advances as the clothes dry. thescreen may be washed with soap and water if needed.
dial may advance slowly or quickly
depending on the moisture content
of the clothes.Lubrication
? Do not set the timer for a ?higher?All moving parts are sealed in a permanent supply of lubricant or are equipped
setting than necessary. If you have a
permanent press/knit cycle, use itwith oilless bearings. Additional lubrication will not be necessary.
for loads of permanent press, knits,
and for clothes made from, orExhaust System
containing synthetic fibers. This?The exhaust duct should be inspected after one year of use and cleaned
cycle has a longer COOL DOWNif necessary. Inspect and clean exhaust duct every one to two years as
period at the end of the cycle torequired thereafter.
reduce wrinkling.?The weather hood should be checked frequently to make sure the
dampers move freely, dampers are not pushed in and that nothing has
How to Remove Ball Pointbeen set against them.
Pen Ink Marks from the
?Keep dryer area clear and free from combustible materials, gasoline and
Dryer Drumother flammable vapors and liquids.
If the ink stain is fresh, place dry rags in?Do not obstruct the flow of combustion (gas dryers) and ventilation air.
the dryer. Using the hottest heat setting,
run the dryer for one hour to absorb the
ink.
If the stain is not fresh, apply household
spray or cream cleaner to a soft cloth,
and rub the stain. Then, place wet rags
in the dryer. Using the hottest heat
setting, run the dryer for one hour to
remove any cleaner residue.
6 |
ACEC
