Load dishes so they are not stacked or overlapping if
possible. For best drying, water must be able to drain from all
Using the Faucetsurfaces.
You can draw water from the faucet while the dishwasher is Make sure pot lids and handles, pizza pans, cookie sheets,
connected.
etc., do not interfere with the spray arm rotation.
NOTE: Do not draw water while the dishwasher is filling or while
water is being pumped out. (This helps prevent a low fill when Run a rinse cycle to keep dishes moist if you do not plan to
dishwasher is filling or mixing drain water with fresh water when wash them soon. Foods like eggs, rice, pasta, spinach, and
dishwasher is draining.)cooked cereals may be hard to remove if they are left to dry
over a period of time.
Press the red button on the hose connector to draw water from
the faucet. (The faucet is set on hot. Adjust the faucet for the Quiet operating tips
water temperature you want.)To avoid thumping/clattering noises during operation:
Make sure lightweight load items are secured in the racks.
Make sure pot lids and handles, pizza pans, cookie sheets,
etc., do not touch interior walls or interfere with the rotation of
the spray arm.
Load dishes so they do not touch one another.
NOTE: Turn the hot water back on after you draw water from the NOTE: For built-in models, keep sink drain plugs closed during
faucet. Turn off the cold water.
dishwasher operation to prevent noise transfer through drains.
Disconnecting the Dishwasher
Loading the Top Rack
1. Turn the hot water off. (This can be done after the last rinse.)
The top rack is designed for cups, glasses, and smaller items.
2. Press the red button on the connector to release the water (See recommended loading patterns shown.)
pressure.NOTE: The features on your dishwasher rack may vary from the
drawings shown.
1. Faucet adapter
2. Locking collar
3. Red button
4. Hose connector
3. Lift slightly on the hose connector while pulling down the Cup and glass load
locking collar. Pull down on the connector.
4. Empty any remaining water from the connector by turning the
connector upside-down.
5. Unplug the power supply cord and return it to the storage
compartment.
6. Return the hoses to the storage compartment.
DISHWASHER LOADING
Loading Suggestions
Remove leftover food, bones, toothpicks and other hard
items from the dishes. It is not necessary to rinse the dishes Mixed load
before putting them into the dishwasher. The wash module Place items so open ends face down for cleaning and
removes food particles from the water. The module contains a
chopping device which will reduce the size of food items.draining.
NOTE: If hard items such as fruit seeds, nuts, and egg shells Load glasses in top rack only. The bottom rack is not
designed for glasses. Damage can occur.
enter the wash module, you might hear chopping, grinding,
crunching, or buzzing sounds. These sounds are normal Place cups and glasses in the rows between tines. Placing
when hard items enter the module. Do not let metallic items them over the tines can lead to breakage.
(such as pot handle screws) get into the wash module.
Damage can occur.China, crystal, and other delicate items must not touch each
other during dishwasher operation. Damage may occur.
It is important for the water spray to reach all soiled surfaces.
9 |
ACEC
