ICE MAKER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word ?DANGER? or ?WARNING.?
These words mean:
You can be killed or seriously injured if you don't immediately
DANGER follow instructions.
You can be killed or seriously injured if you don't follow
WARNINGinstructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock, or injury when using your ice maker, follow these basic
precautions:
Plug into a grounded 3 prong outlet.Disconnect power before cleaning.
Do not remove ground prong.Disconnect power before servicing.
Do not use an adapter.
Replace all parts and panels before operating.
Do not use an extension cord.
Use two or more people to move and install ice maker.
SAVE THESE INSTRUCTIONS
INSTALLATION INSTRUCTIONS
Unpack the Ice Maker
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. Do not WARNING
use chlorine bleach on the stainless steel surfaces of the ice
maker. These products can damage the surface of your ice Excessive Weight Hazard
maker.
Use two or more people to move and install ice maker.
Failure to do so can result in back or other injury.Cleaning Before Use
After you remove all of the packaging materials, clean the inside
Removing Packaging Materialsof your ice maker before using it. See the cleaning instructions in
the ?Ice Maker Care? section.
Remove tape and glue from your ice maker before using.
To remove any remaining tape or glue from the exterior of the
ice maker, rub the area briskly with your thumb. Tape or glue
residue can also be easily removed by rubbing a small
amount of liquid dish soap over the adhesive with your
fingers. Wipe with warm water and dry.
3 |
ACEC
