INSTALLATION INSTRUCTIONS
IMPORTANT: Do not remove the white foam air return insert that
Unpackingis located behind the control panel on the ceiling of the
refrigerator (on some models). The insert is part of the refrigerator
and not part of the packing material. If the insert is removed, ice
may migrate down from the freezer and cause icicles to form.
WARNING
Excessive Weight HazardWhen Moving Your Refrigerator:
Use two or more people to move and install Your refrigerator is heavy. When moving the refrigerator
refrigerator.for cleaning or service, be sure to protect the floor.
Always pull the refrigerator straight out when moving it.
Failure to do so can result in back or other injury.
Do not wiggle or ?walk? the refrigerator when trying to move
it, as floor damage could occur.
Removing packaging materials
Remove tape and glue residue from surfaces before turning
on the refrigerator. Rub a small amount of liquid dish soap Cleaning before use
over the adhesive with your fingers. Wipe with warm water After you remove all of the package materials, clean the inside of
and dry.your refrigerator before using it. See the cleaning instructions in
the ?Refrigerator Care? section.
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For Important information to know about glass shelves
more information, see the ?Refrigerator Safety? section.and covers:
On some models, shelves, bins, door shelf rails, and other Do not clean glass shelves or covers with warm water when
feature parts may be packaged in the Interior FeaturePak.
Follow the instructions contained in the package for proper they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
assembly.For your protection, tempered glass is designed to shatter
Depending on your model, to remove the protective into many small, pebble-size pieces. This is normal. Glass
(transparent) film that is on the nameplate, which is located shelves and covers are heavy. Use special care when re-
on the freezer handle, use your fingernail and peel off the film,
starting from one side and peeling to the other.moving them to avoid impact from dropping.
There are 4 bolts that secure the refrigerator to the shipping
case. Keep these bolts because they are the refrigerator's
leveling legs.
4 |
ACEC
