Door reversal
The appliance?s door has been locked in position forWarning!
transport by means of pins on both sides. According
If the ambient temperature is cold (i.e. in
to the door opening direction, remove relevant pins
Winter), the gasket may not fit perfectly to the
at the top and at the bottom.
cabinet. In that case, wait for the natural fitting
of the gasket or accelerate this process by
heating up the part involved with a normal
A
hairdrier.
B
D163
Building-in
Dimensions of the recess
Height of housing (1) 702 mmTo ensure adequate ventilation, follow the
Depth of housing (2) 550 mminstructions in the figure.
Width of housing (3) 560 mm
560 mi n 600
50
20
540
702
3
2
min 200cm 550 mi n
50 20
1
2
n
560 mi
D474
The appliance door must be about 20 mm lower than
PR0 the worktop.
It is necessary that the niche is provided with a1. Push the appliance into the recess, making sure
conduct of ventilation having the followingthat it is set back 7 mm from the edge of the base
dimensions:
recess.
Depth50 mm
Width540 mm
D475
9 |
ACEC
