3. Measure out the additives
Operating sequenceIf required, pour fabric softener into the compartment
marked , without exceeding the �MAXE mark.
Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60!C, with
the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
R0070R0071
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
4. Select the option push button/s
Close the door.
5. Select the programme and start
the machine
Turn the programme selector dial clockwise to the
required programme.
Before pulling the On/off programme selector check if:
Y The door is properly closed.
Y The appliance is plugged in.
Y The water supply tap is turned on.
Y The diaphragm lid is correctly screwed into place.
2. Measure out the detergentY The drain hose is adequately positioned.
Pull out the dispenser drawer until it stops. MeasurePull the program dial up to you till it clicks.
out the amount of detergent recommended by theThe pilot light comes on and the program will begin.
manufacturer in a graduated cup and pour it into the
main wash compartment .
If you wish to carry out the prewash, pour detergent
BB
into the appropriate compartment marked .
R0033R0033 B
14 |
ACEC
