Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.English
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or service center.
ProblemSolution
No power.� Check if the AC power cord is properly
connected.
O � is displayed.� Insert a disc.
� Check if the disc is inserted upside down.
�Wait until the moisture condensed at the lens
has cleared.
� Replace or clean the disc, see OMaintenance�.
� Use a readable disc or correctly recorded format
MP3-CD.
No picture on TV screen.� Select the appropriate video input mode on the
TV set.
� Check if the TV set is switched on.
� Check the video connection.
� Check if the system is securely connected.
No colour on TV� TV has a colour system standard. If the discOs or
DVD systemOs colour system is different than
your TVOs colour system, the picture may be
distorted or colourless.
� Change the system t the respective PAL or
NTSC setting.
Distorted or poor picture.� Sometimes a slight picture distortion may appear.
This is not a malfunction.
� Clean the disc.
The aspect ratio of the screen� The aspect ratio is fixed on the DVD disc.
cannot be changed even though� The aspect ratio may not be changed for some
you have set the TV shape.TV systems.
The DVD player does not� Check the source switch on the disc mode.
start playback.� Insert a readable disc.
� Check the disc type, color system and region
code.
�Clean the disc.
� Place the disc with the playback side down.
� Press SYSTEM MENU to turn off the setup
menu.
� Cancel the parental control rating function or
change the rating level.
� Moisture has condensed inside the system.
Remove the disc and leave the system turned on
for about an hour.
27
pg001-pg029_AZ5737_58_English2729/5/07, 17:39 |
ACEC
PHILIPS
