CLEANING THE SHELVES, WIREWORKFit the new bulb by turning in a clockwise direction
RUNNERS AND GRILL/OVEN FURNITUREuntil it is secure. Ensuring the indent to the flange is
pointing to the rear of the oven, replace the glass by
All removable parts, except the grill pan handle, canpushing it firmly into the hole to cover the bulb
be washed in the dishwasher.assembly.
The meat tin, grill pan, grill pan grid, oven shelves
and wirework runners may be cleaned using a soapReplace the shelves and wirework runners. Restore
impregnated steel wool pad. Soaking first in hot
the electricity supply and adjust the time of day and
soapy water will make cleaning easier.clock as necessary.
TO REMOVE THE WIREWORK RUNNERS
The wirework runners in the grill and oven
cavities can be removed for cleaning.
1. Remove all shelves and furniture from the grill
and oven compartments.
2. Hold the wirework at the bottom, unclip from the
cavity side and gently pull towards the centre of
the grill or oven compartment.
3. Unhook the runner at the top and remove from
the cavity.
SIDE PANEL
CAVITY CENTRECLEANING THE DOOR GLASS
To prevent damaging or weakening the
door glass panels avoid the use of the
following:
4. To replace, hook the wirework runner back into Household detergents and bleaches
the grill/oven sides.
Impregnated pads unsuitable for non-
stick saucepans
Ensure that the wirework runners are firmly Brillo/Ajax pads or steel wool pads
in place before refitting the oven shelves. Chemical oven pads or aerosols
Rust removers
REPLACING THE OVEN LIGHT BULB Bath/Sink stain removers
The type of bulb required is a 300°C 25 watt small
Edison Screw. Part number 572 491 5431-00/1
(Available through your local Service Force Centres).The main oven and second oven inner door glass
panels are removable for cleaning.
CAUTION:DISCONNECT THE APPLIANCE
FROM THE ELECTRICITY SUPPLY BEFORE
REPLACING THE BULB.
Under no circumstances should the door
Open the door and remove the shelves and wireworkassembly be detached from the product for
runners to enable easy access to the oven lightcleaning. Please refer to the cleaning
assembly. Insert a flat blade screwdriver betweeninstructions.
the oven side and glass which covers the bulb.
Support the glass with your hand and prise out
sufficiently to release the glass cover. Unscrew the
bulb in an anticlockwise direction until it is possible to
remove the bulb with ease.
29 |
ACEC
ELECTROLUX
