Door reversal
CONTENTS
1. Disconnect from the electricity supply.
2. Remove all loose items, including food, store
food in a cool place.
3
Instructions for the UserInstructions for the
3. Gently lay the fridge/freezer on its back with the
top held away from the floor by 5-8 cm (2-3
Installer
Important Safety Information2
inches) of packing;
1
4. Remove the feet (2-3)
Description of the Appliance4Technical Specification15
2
5. Remove bottom hinge (1).
Operation 5Installation16
6. Remove the freezer door by releasing it from theD715 PIED/M
middle hinge (H).Before use 5Positioning16
7. Unscrew the middle hinge.Rear Spacers16
Setting the temperature5
8. Slide out the fridge door from pin (D), unscrew
The freezer compartment517
Electrical Connection
the latter and then screw it down into the hinge
H
provided on the opposite side, after havingFreezing fresh food5
Door Reversal18
removed the small plugs (I) which should then be
Frozen food storage5
fitted on the opposite side.
Thawing6
9. Refit the fridge door and replace the middle hinge
to the left hand side.Making ice cubes6
10.Replace the door and bottom hinge (1) on theFresh food refrigeration 6
opposite side.
Normal operating sounds6
11.Refit the feet (2-3) on the opposite side.
Movable shelves6
12.Unscrew the handles. Refit them on the opposite
side. Hints and Tips7
13.The doors can be aligned by adjusting the
Maintenance and Cleaning8
middle hinge.
14.The middle hinge can be adjusted horizontallyInternal cleaning8
with a screwdriver, after having slackened the two
External cleaning8
D
screws.
When the appliance is not in use 8
Retighten the screws after adjustment.
Changing the light bulb 8
Defrosting8
D590
AttentionSomething Not Working10
After completion of the door reversing operation,
Service and Spare Parts11
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
Customer Care 11
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
Guarantee Conditions 14
accelerate this process by heating up the part
involved with a normal hairdryer on a cool setting.
PR04
2222 069-91
183 |