Changing the Opening Direction of theTake off the handle cover (see Fig. 3a). Remove the
Doorhandle and reŢt it on the opposite side.
Unplug the freezer before performing the followingFig. 3a
operations:
Remove the ventilation grill (D-Fig. 2).
Remove the lower hinge (E-Fig. 2) by loosening the
two fastening screws.
Fig. 3
EG
FB0646
GThe holes that are not used are to be masked with the
plastic plugs removed.
D
FIf, after having reversed the door, it is not in line with
the unit, the top hinge can be adjusted.
To do this, use a 10 mm spanner as shown in Figure 3;
D268slacken the nut, align the door by pushing it to the left
Remove the door by sliding it out of the upper pin (A-or right, then re-tighten the nut.
Fig. 3).
Attention
Unscrew the pin and the washer (A+B-Fig. 3) and reŢt
them on the opposite side.After completion of the door reversibility operation,
verify that the door gasket is adherent to the cabinet.
Fig. 4If the ambient temperature is cold (i.e. in Winter), the
gasket may not Ţt perfectly to the cabinet. In that
case, wait for the natural Ţtting of the gasket or accel-
C
Berate this process by heating up the part involved with
a normal hairdrier.
A
Reversing the Quick-freezing Compart-
ment Door (Fig. 4)
Unscrew the closing prong support (A).
D427
Unscrew the two hinges (B) and remove the door.
Turn the closing prong support and Ţx it to the other
ReŢt the door.
side of the Quick-freezing compartment.
ReŢt the lower hinge (E-Fig. 2) on the opposite side byReverse the door and the hinges and mount them on
means of the two screws that have been previouslythe other side of the compartment.
removed.
Check to see that the door closes correctly.
Remove the plastic plug (F-Fig. 2) from the ventilation
grill (D) pushing it as shown by the arrow.Fig. 5
Fit the plastic plug (G) supplied with the appliance, in
B
the seat left free on the opposite side.
ReŢt the ventilation grill.
A
D180
5 |
ACEC
ELECTROLUX
