InsInstrtructions fuctions for the Insor the Insttalleraller
Technical Specifications
ModelEU 1245 T
Gross capacity (l)117
Net capacity (l)100
Width (mm)550
Height (mm)850
Depth (mm)600
Energy consumption (kWh/day)0,56
(kWh/year)204
Energy class, according to EU StandardsA
Freezing capacity (kg/24h)12
Rising time (h)17
Rated power (W)90
Weight (kg)39
Installing the applianceLocation
Transportation, unpackingThe appliance should be positioned in a well
The appliance and the interior fitting are protected forventilated, dry room.
transport.Energy use is affected by the ambient temperature.
Remove all packaging and any adhesive tape.The appliance should therefore:
Any remnants of adhesive can be removed usingnot be installed next to radiators, cookers or
white spirit.other sources of heat
After transportation the appliance must not beonly be installed at a location where the ambient
switched on for 2 hours. This is to allow thetemperature corresponds to the climate
refrigerant to settle.classification, for which the appliance is
designed.
The climate classification can be found on the
Cleaningserial plate.
The following table shows which ambient
Clean the accessories and the inside of the appliancetemperature is correct for each climate
with warm water and bicarbonate of soda (5 ml to 0.5
litres of water). Rinse and dry thoroughly.classification:
Do not use detergents, abrasive powders, highlyClimate Classification Ambient Temperature
perfumed cleaning products, wax polishes orSN+10 to +32 C
cleaning products containing bleach or alcohol.N+16 to +32 C
ST+18 to +38 C
13 |
ACEC
ELECTROLUX
