TableLabel withType ofTemperatureSteam control
ironingfabriccontrol(Types
instructionsGC6016/6014 only)
MIN
Synthetic
fabrics|
e.g.acetate,|
Bacrylic,viscose,1-
polyamide,
polyester|
|
Silk|
|
CWool2q
|
|
Cotton
D3q
LinenMAX
Pleasae note:Z on the label means that
Zthe article cannot be ironed.
Preparing the appliance for useY This table is only valid for plain fabrics.If some kind
of finish (gloss,crinkle,relief etc.) has been applied
- Before you use the appliance for the first time,to the material,it is best ironed at a low
remove any sticker or protective foil from thetemperature.
soleplate.Clean the soleplate with a soft cloth.Y Sort the laundry according to ironing temperature
- Fully unwind the mains cord (J) and supply hose before you start:put wool with wool,cotton with
(L).cotton,etc.
- Place the steam tank (B) on a stable,level surface.Y The iron heats up more quickly than it cools down.
- Place the iron on the iron stand (C).As a result,it is best to start with the articles that
need to be ironed at the lowest temperature,such
as those made of synthetic fibres.Then continue
Tipswith the garments requiring a higher ironing
temperature.
Y First check whether there is a label with ironingY If the fabric consists of various kinds of fibres,always
instructions in the garment.select the temperature required by the most
Always follow the ironing instructions on thedelicate fibre,i.e.the lowest temperature.If,for
garment label.example,an article consists of 60% polyester and
Y If these instructions are missing but you do know40% cotton,it should be ironed at the temperature
what kind of fabric the garment is made of,consultindicated for polyester (1) and without steam.
the table for the recommended ironingIf you do not know what kind(s) of fabric(s) the
temperatures.article is made of,determine the appropriate
temperature by ironing a piece of material that will
5 |
ACEC
PHILIPS
