- Line 4: NOT USED
- Line 5: ?NO SIGNAL?
Indicates that the set is not receiving an ?ident? signal on the selected source.
? no or bad antenna signal; connect a proper antenna signal
? antenna not connected; connect the antenna
? no channel / preset is stored at this program number; go to the INSTALL menu and stor e a proper
channel at this program number
? the tuner is faulty (in this case the CODES line will contain number 13 or 16); check the tuner and
replace/repair if necessary
Note: On some models, (if the BM option is ON), BLUE MUTE is displayed when no sign al is
received.
- Line 6: ?TIMER ON ?
Indicates that the on/off timer is running.
The following Complaints may be caused by the activation of the sleep timer:
The set may turn on from standby or may switch to a different channel without using either the remote
control or the local keyboard.
To switch off the activation timer:
Select ?TIMER? in the ?FEATURE? menu.
Select ?ACTIVATE? in the ?TIMER? menu.
Set to ?OFF? with the left/right cursor keys.
- Line 7: NOT AVAILABLE
- Line 8: ?NOT PREFERRED?
Indicates that at least one channel is deleted as a preferred channel (by default, all channels are skipped.
Note that ?SKIPPED? will always be displayed in CSM unless all the channels are not skipped.
To add a channel as a selected channel to the list of p referred channels:
Select ?INSTALL? menu
Select ?CHANNEL EDIT?
Select ?ADD/DELETE?
Set to ?ADD? with the left/right cursor keys
- Line 9: ?HOTEL MODE ON?
Indicates that the Hotel mode has been activated.
- Line 10: ?SOURCE:?
Indicates which SOURCE is in stalled for this preset.
EXT1, SVHS2, EXT2, Tuner.
- Line 11: ?SOUND?
Indicates which sound mode is installed for this preset.
Mono, NICAM, Stereo, L1, L2, SAP, Virtual or Digital
- Line 12: ?VOLUME?
Value indicates level at entry CSM.
- Line 13: ?BALAN CE?
Value indicates level at entry CSM. |
ACEC
