5678
7.1.6 ERROR DISPLAY
Error codes that are displayed on the FL display without using the remote control unit
FL DisplayPossible causesOperation of the unitA
The sound may not out with
AV1 VERAV-1 chip is not a match with the program of system controller
the specific audio.
CPU AERRCPU address error (Hardware is unusual.)No operation
DMA AERRDMA address error (Hardware is unusual.)No operation
Difference in versions of the internal ROM of the system controller and of the flash
FLASH IDNo operation
ROM, or bus line failure or reverse installation
FLASH WRPWrite protect error of the flash ROMNo operation
Difference in part number of the flash ROM (When the ROM which could't be used
FLASH SIGNo operation
was used.)
Check sum error of the flash ROM (It exceeds the regular size.) or reverse installation
FLASH SUMNo operation
(Hardware is unusual.)
B
FLASH SIZSize error of the flash ROM (Use 4 or 8 M-bit.)No operation
GUI ROM ERRORDifference in version of GUI ROM and system controller software.Operate as the OSD model
The system controller fetched a code other than an operation code (Hardware is
ILLGALNo operation
unusual.)
Difference in version of the internal ROM of the mechanism controller and of the flash
MECHA CPUNo operation
ROM.
RESERVEUndefined interrupt (Hardware is unusual.)No operation
SLOTInappropriate slot command issued (Hardware is unusual.)No operation
Error codes that are displayed on the FL display by using the remote control unit
(Mechanism controller error)
C
To display: ESC + DISPLAY + DISPLAY; Location of the display: At the two digits of center of the FL display
To display the error history: ESC + DISPLAY + One shot; Location of the display: TV screen
Description of
FLCauses if with a DVDCauses if with a CDOperation of the Unit
Error
Search could not be complete within 7
Search could not be complete within 7 CD : Stops,
11 Search timeoutseconds, and it could not enter the target
seconds.DVD: Continues operation
area within 7 seconds by VCD scan.
More beyond the target while the read-in search was converging. A search could not
Search retry CD: Stops,
12be completed after 3 retries while the unit was tracing 11 tracks. A search could not
errorDVD: Continues operation
be completed after retry when timeout occurs at read-in.
Tracing timeout Timeout (10.5 seconds) while tracing at
19Stop
while convergingthe stage of convergence of a search.
D
During Track (Index) Search, the search
for the beginning of a program could not
Index 0 search be completed within 3 seconds (20
1BStop
errorseconds in the case of Index Search)
after positioning based on the TOC data
was completed.
Embossment 1. In wobble nothing (error
plunge errordistinction) : search to
Plunged into unreadable embossment of
1C(only a model address 2E400h
corresponding to DVD-RW player.2. In wobble existence:
RW)Tray open
Timeout of slider
22inner Inside switch could not ON within 3 seconds.Stop
circumferenceE
Timeout of slider
Inside switch could not OFF within the following times:
23outer Stop
circumferenceat ATB: 2 seconds, at Backup: 2 or 2.02 seconds.
Adjusts focus at the innermost
circumference and tries to
return to its position where the
No FOK pulse error was generated (for 3
33When the focus was deviated continuously 20 times.
during playbacktimes),then opens.
If the same error persists after
one retry, the tray opens. (No
FOK pulse)
Were not able to playback from the disc distinction process.
Disc-type-
38PLAY or STOP was not completed by backup operation of the disc distinction.Open
sensing errorF
Distinguished it from the blank disc in the ATB process completion.
DV-59AVi89
5678 |
ACEC
