30 November 1990
13.JOGGER MOVEMENT
7 mm2 mm
(3)
(1)(2)
Copier
Main Motor
Stapler
Entrance Sensor
(1)(2)(3)
Jogger Motor
258 ms
192 ms
Positioning
Roller
When the Start Key is pressed, the copier sends the paper size information to
the finisher. In accordance with that data, the jogger motor moves both
fences to where the width is 14 millimeter wider than the selected paper
width. (1) This gives enough space for the copies to enter the jogger tray.
After the trailing edge of the copy passes the stapler unit entrance sensor,
the each jogger fence moves inward 5 mm. This is 2 mm from the copy edge.
(2)
Just after the positioning roller pushes the copy back, each jogger fences
moves inward 2 mm more so that the leaf spring on the rear jogger fence
pushes the copy side edge slightly. (3)
After a copy is stacked in the jogger tray, the jogger fences move back 7 mm
from the copy edges for the next copy.
10-14 |
ACEC
