8. Load paper into the paper tray.
Do not exceed the maximum height line.
Screw
Right rear cabinet
Screw
Screw
Rear cover
9. Check for center displacement.
?Set an original on the document glass and copy it using the paperScrew
6. Remove the securing fixture for packing the papertray in the copier.
feed unit and remove the packing material.Then, copy an original using the attached optional paper feed unit.
?If the center of the copy image from the tray in the copier is differ-
Remove the securing fixture for packing that fixes the paper pressureent from that of the copy image from the optional paper feed unit,
plate of the tray by rotating it in the direction of the arrow and removecarry out adjustment referring to the service manual.
the packing material.
Installation of Paper feed unit is now complete.
Securing fixture for packing
Packing material
[Caution]
Be sure to remove the
securing fixture before
turning on the power.
7. Change the paper size in the tray.
Hold the grip and slide the cassette side plate to adjust it to the paper
to be used.
Then, fit the rear end plate to the specified size position.
Rear end plate
Side plate
Insert the power plug of the copier to the outlet and turn on the main
switch of the copier. Then, carry out the following procedure. |
ACEC
