INSTALLATION
POSITION
Place the freezer horizontally on a firm surface, resting on all
four wheels.
The room should be dry and adequately ventilated.
If the room temperature exceeds 25°C, falls below 10°C
or the relative humidity exceeds 60%, the appliance will
not function as it should.
Do not place the freezer close to sources of heat, radiators,
chimneys, etc., and do not place the freezer in direct
sunlight.
If the freezer has been handled standing on end it should be
allowed to stand in normal position for about 12 hours before
switching it on
Please ensure that when the appliance is installed it is easily
accessible for the engineer in the event of a breakdown.
EELLEECCTTRRIICCAALL RREEQQUUIIRREEMMEENNTTSS
Before switching on, make sure that the voltage of your
electricity supply is the same as that indicated on the rating
plate, located on the backside of the appliance.
WARNING:
This appliance must be earthed.
SSWWIITTCCHHIINNGG OONN
Before switching on, the freezer should be cleaned inside.
See under ?Maintenance?.
WARNING:
The enclosed wheels must be fitted before
switching on the freezer.Do not use the appliance
without the wheels because it may result
malfunction.
Allow the freezer to run for several hours before placing
food inside.
4 |
ACEC
