INSTALLATION
POSITION
Place the appliance horizontally on a firm surface, resting on
all four wheels.
The room should be dry and adequately ventilated.
If the room temperature exceeds 43°C, or falls below 18°C,
the appliance will not function as it should.
Do not place the appliance close to sources of heat,
radiators, chimneys, etc., and do not place the appliance in
direct sunlight.
If the appliance has been handled standing on end it should
be allowed to stand in normal position for about 12 hours
before switching it on.
Please ensure that when the appliance is installed it is easily
accessible for the engineer in the event of a breakdown.
EELLEECCTTRRIICCAALL RREEQQUUIIRREEMMEENNTTSS
Before switching on, make sure that the voltage of your
electricity supply is the same as that indicated on the rating
plate, located on the backside of the appliance.
WARNING:
This appliance must be earthed.
SSWWIITTCCHHIINNGG OONN
Before switching on, the appliance should be cleaned
inside. See under ?Maintenance?.
FITTING WHEELS
The wheels are fitted as shown in the drawing, using the
enclosed fitting key.
4 |