1. EX-91D-UK English 10/02/2005 11:36 Page 40
INSTALLATION
INSTALLING THE APPLIANCE
1. Remove all packaging and check carefully for
any signs of damage.
2. If the microwave is fitted in position C, ensure thatmin. 20 mmmin. 20 mm
the minimum air gaps are maintained as shown in
the diagram.
3. Secure four cupboard retention blocks in positionPosition APosition B
450 mm450 mm
using the setting template (TMAPTA004URR0).
4. Fit the appliance into the kitchen cupboard, lift
over the bottom/front blocks then push slowly,
and without force, until the front frame of the oven
Conventional
seals against the front opening of the cupboard.
oven
5. Ensure the appliance is stable and not leaning.
6. Fix the oven in position with the screws provided.
The fixing points are located within the louvre5 mm65 mm
areas at the top and bottom of the oven (see
diagram, item 1, on page 5).Position C460 mm
7. Fit the frame fastner caps to the four fixing
positions (2 spare caps are provided).
8. It is important to ensure that the installation of this
20 mm
product conforms to the instructions in this
operation manual and the conventional oven or
hob manufacturerOs installation instructions.
The microwave can be fitted in position A, B or C:
Chimney
Cable clip
Chimney
Position ACable clip
Position B
D
ConventionalPosition C
oven
POSITIONNICHE SIZECHIMNEYGap Between
WDH(min)Cupboard & Ceiling
A560x550x4502050
B560x550x4502050
C560x550x46020Not Applicable
Measurements in (mm)
40 |