Description of the appliance
Rinse conditioner dispenser (1)Coarse strainer (3)
Use of a rinse conditioner will result in cleaner and fasterThe purpose of the coarse strainer is to catch large objects
drying of the load, since it helps water and soil to run off.such as toothpicks and pieces of eggshell. Make sure that
Too much conditioner may result in streakiness, too littlethe strainer is always clean. Lift it out and rinse it under
may cause white spots. The dispenser holds about 140 ml.running water whenever necessary.
This is enough for 40-70 wash cycles, depending on the
dosage setting. When the rinse conditioner level is appro-Fine filter (4)
aching the bottom of the scale it is time to refill the dispenser.
Swivel out the filler trough and carefully fill up with rinseIt is just as important to keep this filter clean. A dirty or
clogged filter will always impair washing efficiency. The
conditioner until the level reaches up to the red mark onfine filter can easily be lifted out for cleaning when you
the level indicator tube. Do not overfill and carefully wipehave removed the coarse strainer.
off any spillage to prevent sudsing problems. Don't forget
the close the filler trough afterwards. Adjust the dosage
Detergent dispenser (5)
setting according to the hardness if the water. Begin with
the lowest dosage setting and increase as necessary byOnly use detergents specially designed for dishwashers.
turning the arrow clockwise. Pour the detergent into the compartment, for a normal load
Note!Do not fill the rinse conditioner dispenser with liquidabout 1-2 tablespoons.
detergent.
Spray arm (2)
It is important to keep all the holes in the spray arm clear.
A clogged hole can seriously affect washing efficiency. If
the spray arm needs cleaning, unscrew the nut clockwise
(left-hand thread) and lift off the spray arm. Clear the holes
and shake out any food remnants.
- 4 - |
ACEC
