Operating sequence
1. Check the filters 8. Start the programme
Ensure they are clean and properly positioned Depress the On/Off pushbutton. The On/Off
(see cleaning instructions). indicator light comes on and the machine will
start.
2. Check that there is rinse
9. At the end of the
aid and salt
washing programme
At the end of the washing programme the
3. Load the dishes dishwasher stops automatically. The On/Off
indicator light remains on until the On/Off
Remove any scraps of food. pushbutton is depressed.
Pull the lower basket out and arrange the
saucepans, plates and cutlery in it.
Pull the upper basket out and arrange the plates,10. Switch off the
saucers, glasses and cups etc. in it.
Slide the basket back into the machine. dishwasher
Switch off the dishwasher by pressing the
On/Off pushbutton.
4. Ensure that the spray
arms can rotate freely.
When the wash programme has
finished, it is recommended that the
dishwasher is unplugged and the
5. Measure out detergent water tap turned off.
Add the required amount of detergent into the
In general it is not advisable to open
dispenser according to the "Washing the door while the machine is
programmes" chart and close the lid. working;if the door is opened
however, a safety device ensures
6. Close the detergent that the machine stops.
Care must be taken if the door is
dispenser lidopened during the hot phase or
immediately after a programme has
finished, as steam may escape.
7. Select the programme
Close the door.
Turn the programme selector dial clockwise
until the marker on the knob corresponds with
the programme you wish to select.
15POS02UK |
ACEC
