Rinse aid
Rinse aid ensures that your dishes gleam and are
The w indicator will indicate the current setting:
free from spots, and that your glasses are clear.
Rinse aid can be added in one of two ways:The w indica-
Rinse aid inflow activated
If you are using dishwasher detergent that alreadytor is illumi-(ex-factory setting)
contains rinse aid, the detergent including the
nated:
rinse aid is put into the detergent compartment.
- In this case the dispensing of rinse aid from theThe w indica-
supply container must be deactivated to avoid
Inflow of rinse aid is deactivated
a double dosage.tor is not illumi-
nated:
If you are using dishwasher detergent and rinse
aid separately, the rinse aid is to be put into the4. Pressing function button 2 activates and deacti-
rinse aid supply container.
vates the rinse aid dispensing function.
- In this case the dispensing of rinse aid from the
supply container must be activated.5. When the rinse aid dispensing setting is correct,
press the ON/OFF switch.
- The amount of rinse aid to be dispensed must
The setting for the rinse aid dispensing function is
be set.
now saved.
Use only branded rinse aid for dishwashers.
1
Never fill the rinse aid container with any
another substance (e.g. concentrated vine-
gar) or dishwasher cleaning agent. This
would damage the appliance.
Activating/deactivating the inflow
of rinse aid
Some appliances are equipped with an addi-
3
tional 3in1 function.
If you use 3-in-1 dishwashing tablets and
select the 3in1 function together with the
dishwashing cycle, the inflow of rinse aid
does not have to be deactivated (see ?3in1
function?).
1. Press the ON/OFF button.
The LED indicators for all the buttons in the con-
trol panel that are now able to be selected will
become illuminated.
If the only LED indicator illuminated is one
3 that belongs to a programme button, this
means that this dishwashing cycle has been
activated. The dishwashing cycle must be
deselected (RESET):
Press function buttons 2 and 3 simultane-
ously for approx. 1 second.
The LED indicators for all the buttons in the
control panel that are now able to be
selected will become illuminated.
2. Press function buttons 2 and 3 simultaneously
and keep them pressed.
The LED indicators for the function buttons 1 to 3
will flash.
3. Press function button 2.
The LED indicator for function button 2 will flash.
13 |
ACEC
