How to use the pyrolytic cleaning
function
Before activating the pyrolytic cleaning function,
remove any excessive spillage and make sure
that the oven is empty. Do not leave anything
inside it (e.g. pans, grids, baking tray, dripping
pan, etc.) as this could heavily damage them.
Ensure that the oven door is closed before
activating the pyrolytic cleaning function.
When the pyrolytic cleaning function is on, it is
advisable not to use the hob as this could cause
overheating and damage the appliance.
During the pyrolytic cleaning cycle the oven door
becomes hot. Children should be kept away until
it has cooled.
To activate the pyrolytic cleaning function proceed
!!!!!
as follows.
1. Press button to switch on the oven. Turn the oven
knob to position . The symbol appears on
the display and the ?PI? indication means that the
Pyrolytic Cleaning Level 1 is currently pre-selected.
Simultaneously, the symbol and the ?Pyro?
writing will flash in the display and an acoustic signal
will be emitted.
This means that, before activating the pyrolytic
cleaning function, you have to remove all the oven
accessories.
2. The Cooking Duration symbol will flash for 5
seconds. During this time turn the Time/Temperature
knob to or to change to Pyrolytic Cleaning
Level 2 (P2) or go back to Pyrolytic Cleaning Level 1 (PI).
3. Once you have chosen the desired Pyrolytic Cleaning
Level, the ?Pyro? writing will flash on the display
waiting for confirmation to start the Pyrolytic Cleaning
cycle. You can still change your mind and turn the
the Time/Temperature knob to or . In that
case the Cooking Duration symbol will flash again
to allow you to change the selection.
4. To confirm the selected Pyrolytic Cleaning Level, press
the Pyrolysis button : the ?Pyro? text stops
flashing, the symbol disappears, the oven
light goes out and the pyrolytic cleaning cycle starts.
As soon as the oven heats up, the thermometer
symbol rises slowly , indicating that the temperature
inside the oven is increasing.
5. After some time, the door lock will be activated and
the related symbol will be displayed (Fig. 25).
6. At the end of the pyrolytic cleaning process, the
display will show the time of day till the door lock will
be on.
7. Once the oven has cooled down, an acoustic signal
will be emitted and the door will unlock.
To stop the pyrolytic cleaning cycle at any time,
press button .
NOTE: The time indication is comprehensive of the
cooling down time.
18 |
ACEC
