SOMETHING NOT WORKINGt
If the appliance is not functioning properly, check that:
MalfunctionRemedy
Appliance does not function, no pilot light is illuminated.- Appliance is not switched on; switch appliance on.
- Mains plug is not inserted or is loose; insert mains plug.
- Fuse has blown or is defective; check fuse, replace if
necessary.
- Mains socket is defective; Mains malfunctions are to be
corrected by an electrician.
The freezer temperature is not sufficient, red light lights up.- Temperature is not properly adjusted; please refer to the
section OTemperature regulation�.
- Door was open for a long time; only leave the door open
as long as necessary.
- Within the last 24 hours a large quantity of warm foods
were loaded; press the fast freeze button.
- Appliance is next to a source of warmth; please refer to the
section OLocation�.
Large accumulation of frost in the appliance, perhaps also at- Door is not properly sealed (perhaps after re-hanging
the door seal.door); carefully warm the door seal with a hand-held hair
dryer at those points which are not airtight (no warmer
than approx. 50!C). At the same time, shape the warmed
door seal by hand, so that it is again properly seated.
Unusual noises.- A part at the back of the appliance, e.g. a tube, is in
contact with another appliance part or the wall; bend this
part away carefully if necessary.
The compressor does not start immediately after pressing the- This is normal, no error has occurred; the compressor
fast freeze button or after changing the temperature setting.starts after a period of time.
If your appliance is still not working properly after making the above checks, contact the nearest service centre.
To obtain fast service, it is essential that when you apply for it you specify the model and serial number
of your appliance which can be found on the guarantee certificate or on the rating plate located inside
the appliance, on the bottom left-hand side.
TECHNISCHE ANGABE
Die technischen Angaben sind auf dem Typschild genannt, das auf der linken inneren Seite der Anlage liegt.
67 |
ACEC
