SOMETHING NOT WORKING?
Problems which you can resolve yourselfUnsatisfactory washing results:
nToo little detergent or unsuitable detergent has
The machine does not start up:
been used.
Check that the door is firmly closed.nn
Stubborn stains have not been treated prior to
nCheck that the machine is plugged in and thatwashing.
there is power at the socket.
nThe correct temperature was not selected.
nCheck that the main fuse has not blown.
The machine vibrates or is noisy:
nCheck that the programme selector dial is posi-
tioned correctly and the ON/OFF button de-
nCheck that all the transit bolts and packing have
pressed.
been removed.
nCheck that the machine is not resting against any-
The machine does not fill:
thing.
nCheck that the water tap is open.
nCheck that the support feet are resting firmly on
nCheck that water is coming out of the tap.
the ground and that the lock nuts are securely
nCheck that the inlet hose is not squashed ortightened.
kinked.nCheck that the laundry is evenly distributed in the
nCheck that the filter in the inlet hose is not blocked.drum.
nnCheck that the door is closed.Maybe there is very little laundry in the drum.
The machine fills then empties immediThe mac-hine does not dry:
ately:
nCheck that the drying time has been selected.
nThe end of the drain hose is too low. Refer to rele-n Check that the tap is open.
vant paragraph in Owater drainage� section.
nCheck that the drain filter is not blocked.
nCheck that the drum is not overloaded.
The machine does not empty and/or does
nCheck that a suitable drying time has been select-
not spin:
ed, in the correct sector.
nCheck that the drain hose is not squashed or
The door will not open:
kinked.
nThe drain filter is blocked. Clean it.nThe programme is still running.
nA gentle programme has been selected (the watern The door lock has not yet been released.
remains in the tub after the last rinse).
nThe wash load is unbalanced: redistribute theIf you are unable to identify or solve the problem, con-
clothes inside the drum to allow the machine totact our service centre. Before telephoning, make a
spin.note of the model, serial number and purchase date of
your machine: the Service Centre will require this
There is water on the floor:information.
nToo much detergent or unsuitable detergent (cre-Rating plate
ates too much foam) has been used.
nCheck whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this
as the water runs down the hose; check to see if it
is damp.
nCheck that the drain hose is not damaged.
Mod. ..........
Prod. No. ...........
nCheck that the drain filter has been refitted correct-Ser. No. .........P0042
ly after cleaning.
15 |
ACEC
