Operating sequence
Important:5 Select the temperature
Before washing your first load of laundry, we recom-Turn the selector dial to
mend that you run a cotton cycle at 60with the!C, the required temperature95°
machine empty, in order to remove any manufactur-setting.
ing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
Place the laundry in the drum
Open the door and placeP0881
the laundry in the drum,
one item at a time, shak-
ing them out as much as6 Select the programme and start it
possible. Close the door.Turn the programme selector dial clockwise to the
required wash programme and press the start/stop
button :the operating light comes on and the
machine starts to operate.
P0004
A
2 Measure out the detergent
Pull out the dispenser
drawer until it stops.
Measure out the amount
of detergent recom-
mended by the manufac-
turer in a graduated cupP0882P0080
and pour it into the main
wash compartment .7 At the end of the programme
If you wish to carry out
the extra prewash, pourP0876The machine stops automatically.
detergent into the appro-It is normal to have to wait for about 2 minutes before
priate compartment marked .
being able to open the door to allow the safety lock to
release.
3 Measure out the additive Press the start/stop button again and the operat-
If required, pour fabricing pilot light goes out.
softener into the com-Remove the laundry.
partment marked
without exceeding theTurn the drum by hand to make sure it is completely
�MAXE mark.empty, so as to avoid any forgotten items being dam-
aged in a subsequent wash (e.g. shrinking) or their
colour running into a load of whites.
Release any buttons which have been pressed.
P0877Turn the water tap off and unplug the machine.
Leave the door ajar to air the machine.
4 Select the required option(s)
Depress Super Rinse and/or Quick Wash or
Anti-Crease button depending on the selected
programme.
26 |
ACEC
