ProblemPossible cause
? The machine vibrates or is noisy:? The transit bolts and packing have not been
removed.
? The support feet have not been adjusted.
? The laundry is not evenly distributed in the drum.
? Maybe there is very little laundry in the drum.
? The door will not open:? The programme is still running.
? The door lock has not yet released.
? The water level is above the bottom edge of the door.
? The machine is heating the water.
The door can only be opened when the relevant
light has gone out.
ENGLISHENGLISH
? Spinning starts late or the laundry is? The electronic unbalance detection device has cut
in because the laundry is not evenly distributed in
not spun enough:
the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several
times before the unbalance disappears and normal
spinning can resume. If, after 6 minutes, the
laundry is still not evenly distributed in the drum,
the machine will spin at a lower speed. If at the
end of the programme the laundry is not spun
enough, redistribute the load manually and select
the spin programme.
-
-"- -
-- ---
-
- -
--!
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning, make
a note of the model, serial number and purchase
date of your machine: the Service Centre will require
-
this information. -
47 |
ACEC
