If the card requires an IRQ (interrupt request), make sure that there is
one available.
The PC Card stops communicating properly.
The application may have been reset when the computer is turned off
or in Standby mode. Exit and restart the application.
- -
1
-(
2
The computer does not enter Standby or Hibernation mode
automatically.
If you have a connection to another computer, the computer does not
enter Standby or Hibernation mode if the connection is actively in
use.
Make sure that the Standby or Hibernation time-out is enabled.
The computer does not enter Standby or Hibernation mode
immediately.
If the computer is performing an operation, it normally waits for the
operation to finish.
The computer does not resume from Standby or Hibernation mode.
The computer automatically enters Standby or Hibernation mode
when the battery pack is empty. Do any one of the following:
- Connect the AC adapter to the computer.
- Replace the empty battery pack with a fully charged one.
The computer does not enter Hibernation mode with the + hot
keys.
Make sure that the Hibernation function is specified for the sleep
button.
If you are using Windows 98, make sure that the hibernation partition
or file exists.
You might be using a PC Card that prevents the computer from
entering Hibernation mode. To enter the mode, stop the
communication program and then remove the card or stop the card.
2 3)&. |
ACEC
