Installing your television set
&Positioning the television set Remote control
Place your TV on a solid, stable surface, leavingInsert the two R6-type batteries (supplied)
a space of at least 5 cm around the appliance.making sure that they are the right way round.
To avoid accidents, do not put anything on theCheck that the mode selector is set to TV.
set such as a cloth or cover, a container full ofThe batteries supplied with this appliance do not
liquid (vase) or a heat source (lamp).The setcontain mercury or nickel cadmium.If you have
must not be exposed to water.access to a recycling facility,please do not discard
your used batteries (if in doubt,consult your dealer).
When the batteries are replaced,use the same type.
5 cm
5 cm5 cm
éConnectionsSwitching on
Y Insert the aerial plug into the : socket atTo switch on the set, press the on/off key.
the rear of the set.A red indicator comes on and the screen
Y Insert the mains plug into a wall socket (220-lights up. Go straight to the chapter Quick
240 V / 50 Hz).installation on page 4.
If the television remains in standby mode,
press P # on the remote control.
The indicator will flashe when you use the remote
control.
The keys on the TV set
The television set has 4 keys which areThe VOLUME - + (- +) keys are used to
located on the front or the top of the setadjust sound levels.
depending on the model.The PROGRAM - + (- P +) keys are used to
select the required programmes.
- a +To access the menus, simultaneously hold
--Pa++down the - and + keys.The-P +
PROGRAM - + keys may then be used to
select an adjustment and the - + keys to
make that adjustment.
To exit from the menus, hold down the 2
- and + keys.
Note:when the CHILD LOCK function is activated,
these keys are unavailable (refer to FEATURES
menu on page 8).
2 |
ACEC
