Preparation
English
General notesComponent Video (Y CB CR) connection
1Connect the Y, CB, CR out jacks on the DVD-player to the
? Depending on your TV and other equipment you wish to
connect, there are various ways you could connect thecorresponding jacks on the TV using optional Y, CB, CR cable (W).
player.2Connect the audio Left and Right out jacks to the audio
? Please refer to the manuals of your TV, VCR, Stereo Systemleft/right in jacks on the TV (A).
or other devices as necessary to make the best
TV
connections.
? For better sound reproduction, connect the playerOs audio
out jacks to the audio in jacks of your amplifier, receiver,
stereo or A/V equipment. See �Connecting to optional
equipmentO.
Caution:
� Do not connect the playerOs audio out jack to
AW
the phono in jack of your audio system.
� Do not connect your DVD-player via your VCR.
The DVD image could be distorted by the copy
protection system.LEFTCENTERLEFTYCBCRAUX/VCRMULTICHANNEL AUDIO OUTI
DIGITAL AUDIO OUTPCM/MPEG2/AC3/DTSREARFRONTIN
TV OUTIIMAINSL(CVBS)
OPT OUTDIG OUTRIGHTREARSUBW. RIGHTFRONTAUDIO OUTRVIDEO OUTS-VIDEO OUT(Y/C)
Connecting to a TV
1Connect the SCART to the corresponding connector on
Connecting to optional
the TV using the SCART cable supplied (Z).
equipment
If your TV is not equipped with a SCART you can select
one of the following alterative connections:
Connecting to an amplifier equipped with
S-Video (Y/C) connectiontwo channel analog stereo or Dolby
Surround
1Connect the S-Video out jack on the DVD-player to the S-
Video in jack on the TV using an optional S-Video cable (Y).1Connect the audio Left and Right out jacks of the DVD
2Connect the audio Left and Right out jacks to the audioplayer to the audio left and right in jack on your amplifier,
left/right in jacks on the TV (A).receiver or stereo system, using the optional audio cable
(A).
Video CVBS connection
Connecting to an amplifier equipped with
1Connect the Video out (CVBS) jack to the video in jack ontwo channel digital stereo (PCM) or to an
the TV using the video cable supplied (X).
A/V receiver equipped with a multi-channel
2Connect the audio Left and Right out jacks to the audio
decoder (Dolby Digitala, MPEG 2 and
left/right in jacks on the TV (A).
DTS)
TV
1Connect the playerOs digital audio out jack (optical G or
coaxial F) to the corresponding in jack on your amplifier.
Use an optional digital (optical G or coaxial F) audio cable.
2You will need to activate the playerOs digital output (see
�Personal PreferencesO).
AXYZ
MULTICHANNEL AUDIO OUT
LEFTREAR CENTER LEFTFRONTYCBCRAUX/VCRI
DIGITAL AUDIO OUTPCM/MPEG2/AC3/DTSIN
TV OUTII
MAINSL(CVBS)(Y/C)
R
OPT OUTDIG OUTRIGHTREARSUBW. RIGHTFRONTAUDIO OUTVIDEO OUTS-VIDEO OUT
10PREPARATION |
ACEC
